Custom specific software development


Integration of customer requirements:


MCPS is in general a standard data acquisition program. Around MCPS there are two possibilities to adapt it to custom specific applications:
a) With specific scripts a lot of requirements can be solved especially for evaluations and reports
b) CAD Computer can develop software expansions, which are loaded by MCPS similar to plug-ins to increase the functionallity.

Example:

A customer wanted to see the data values on large 7 segment LED displays. Since the displays could only show one channel, the values should rotate every 2 seconds. Depending on a digital input signal the rotation should by stopped by user or started again.
CAD Computer developed an additional software module (as a DLL), which is loaded by MCPS as startup. After a scan is completed MCPS transfers the channel values to the DLL. The custom DLL handles the communication to the displays and sends the data in a proper format. This feature was implemented for four independent measurements and displays at the same time.
 
Hotline: +49 (0) 2162 81615-0     Fax -22        sales@cad-computer.de

     Copyright CAD Computer GmbH & Co. KG 2013